Page Connecting Connecting Connecting with a Computer This section describes how to connect the projector to a computer. The example below uses the RGB connector. Press the APA key again during the adjustment to restore the original screen. The picture may not be adjusted properly depending on the kinds of input signals.
The Digital Zoom icon appears at the center of the image. To select the language used in the menu, see page 26 GB. Press the MENU key. The menu display appears. Unadjustable items depending on the input signal are not displayed in the menu. Signal Memory No. Center of the lens These installations may cause malfunction or damage to the projector.
Do not place the unit on surfaces rugs, blankets, etc. Page 31 Notes for Installation Blocking the ventilation holes Avoid using something to cover over the ventilation holes; otherwise, the internal heat may build up. If you touch the lamp unit, you may be burned or injured. Turn the projector back over.
Connect the power cord and turn the projector to the standby mode. Colors are not correct. If you still have a problem after consulting the help messages, please check the following. If the problem persists, contact your Sony dealer.
Power Symptom Cause The power is not turned on. The ANSI lumen rating measures the brightest white that a projector can produce by averaging nine light meter measurements taken across the projected image. BUYER BEWARE Either this projector's brightness specification does not cite an industry-accepted unit of measurement, or according to our calculations it seems unlikely that this projector is capable of producing the manufacturer's cited brightness specification.
Reviews Projectors Screens Accessories. Projector Database 11, Projector Forums Login. Large Venue Classroom Interactive Conference. The Installation Menu Exit: Initial setting Note The auto V Keystone adjustment may not correct the trapezoidal distortion perfectly, depending on the room temperature or the screen angle. Initial setting The Installation Menu Setting items Functions Status on-screen Sets up the on-screen display.
Page The Information Menu The Information Menu The Information menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp. Setting items Functions Displays the horizontal frequency of the input signal. The displayed value is approximate. Thus, replace the lamp with a new one in the following cases. Page 32 Insert the new lamp all the way in until it is securely in place a. Tighten the two screws c.
Fold down the handle to replace it b. Fold down the handle. Remove dust from the outside of the ventilation holes with a vacuum cleaner. This value varies depending on the environment or how the projector is used.
Page Troubleshooting B Others Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel.
Power Symptom The power is not turned on. Page 35 Symptom Cause and Remedy The picture is noisy. Noise may appear on the background depending on the combination of the number of dots input from the connector and the numbers of pixels on the LCD panel.
Page 36 Attach the cover securely see page 32 and Page Messages List Input a signal that is within the range of the frequency.
Page 38 Message Lens control is locked! Do you wish to unlock? For details, please consult your nearest Sony dealer.
0コメント